Welcome to N4PY Software
Customer Service Second to None
N4PY Software is your source for high quality, effective rig control software for your transceiver. N4PY offers rig control software for a wide variety of receivers from the Elecraft K3 to the Ten Tec RX 320 receiver. N4PY Software has been in existence since 1999. There are many reviews of this software on Eham. All N4PY Software will run for 10 days without a password. Just download the software you are interested in to get a 10 day free trial. And don't hesitate to ask any questions you might have by sending an email to me.
All N4PY software programs run on windows operating systems Windows XP, Vista, Windows 7, and Windows 8 (including the 64 bit versions of XP, Vista, and Windows 7 and 8). I have older versions on the "previous versions" page that will run on Windows 95, 98, ME, and 2000.
New Features now available
Added full support for the Kenwood TS-990.
The KX3 IQ outputs can be used with NaP3 for a full panadapter with no additional hardware.
Pegasus Plus now has full support for Rohde & Schwarz XK2000 series and EK-890.
Tentec Argonaut VI and Eagle fully supported in the N4PY Orion program.
All programs now have support for the Perseus receiver as a Panadapter.
All programs now have a total of three external comports to allow panadapters, CWSkimmer,
and external logging programs to run at the same time without LP Bridge.
All programs now have a method for receiving CW characters from contesting programs.
This is most useful when running a client-server setup.
The Icom program now has full support for a standalone Perseus receiver.
All programs now have support for the RFSpace SDR-IQ panadapter.
All programs now have rotor support.
All Programs now have support for TRX-Pan with LP-Pan. This panadapter has a much simpler installation as no virtual comports are required.
The Pegasus Plus program now has support for the ADR2200 antenna switch.
The Pegasus Plus program now has support for the Alpha 87A amplifier.
The Icom program now has full support for the IC-9100 transceiver.
The Pegasus Plus program now supports the Tentec RX-400 HF/VHF/UHF transceiver.
All N4PY software now built with Microsoft Visual Studio C++ 2010.
Remote Mirrored Radio Operation for Two Identical Icom Radios.
All N4PY software programs run on windows operating systems Windows XP, Vista, Windows 7, and Windows 8 (including the 64 bit versions of XP, Vista, and Windows 7 and 8). I have older versions on the "previous versions" page that will run on Windows 95, 98, ME, and 2000.
New Features now available
Added full support for the Kenwood TS-990.
The KX3 IQ outputs can be used with NaP3 for a full panadapter with no additional hardware.
Pegasus Plus now has full support for Rohde & Schwarz XK2000 series and EK-890.
Tentec Argonaut VI and Eagle fully supported in the N4PY Orion program.
All programs now have support for the Perseus receiver as a Panadapter.
All programs now have a total of three external comports to allow panadapters, CWSkimmer,
and external logging programs to run at the same time without LP Bridge.
All programs now have a method for receiving CW characters from contesting programs.
This is most useful when running a client-server setup.
The Icom program now has full support for a standalone Perseus receiver.
All programs now have support for the RFSpace SDR-IQ panadapter.
All programs now have rotor support.
All Programs now have support for TRX-Pan with LP-Pan. This panadapter has a much simpler installation as no virtual comports are required.
The Pegasus Plus program now has support for the ADR2200 antenna switch.
The Pegasus Plus program now has support for the Alpha 87A amplifier.
The Icom program now has full support for the IC-9100 transceiver.
The Pegasus Plus program now supports the Tentec RX-400 HF/VHF/UHF transceiver.
All N4PY software now built with Microsoft Visual Studio C++ 2010.
Remote Mirrored Radio Operation for Two Identical Icom Radios.
Now Available - Finally a pod knob that will work with all radios and does not have the classic focus problem.
All N4PY programs now have support for a knob that has 4 buttons and will provide excellent tuning knob action. This knob can be used with ANY radio that N4PY can control. This includes the Elecraft K3, K2, all Icom radios, some Yaesu radios, and Tentec radios. This knob can be configured for over 30 different actions. And this knob can control the radio even when the N4PY program does not have the focus. This will greatly improve Remote operation and those persons that wish to have a
tuning knob on their desk. The knob can control VFO A, VFO B, RIT, PBT, Volume, and many other things.
You can purchase this knob on the Flex radio website at www.flex-radio.com. Go to the Online Store and select "Accessories" to find it. N4PY Software has no connection with Flex Radio.
N4PY Knob Instructions
All N4PY programs now have support for a knob that has 4 buttons and will provide excellent tuning knob action. This knob can be used with ANY radio that N4PY can control. This includes the Elecraft K3, K2, all Icom radios, some Yaesu radios, and Tentec radios. This knob can be configured for over 30 different actions. And this knob can control the radio even when the N4PY program does not have the focus. This will greatly improve Remote operation and those persons that wish to have a
tuning knob on their desk. The knob can control VFO A, VFO B, RIT, PBT, Volume, and many other things.
You can purchase this knob on the Flex radio website at www.flex-radio.com. Go to the Online Store and select "Accessories" to find it. N4PY Software has no connection with Flex Radio.
N4PY Knob Instructions
Tentec now uses N4PY software to test their radios on their production line.
N4PY Software Offered:
Client-Server Now Available in all N4PY Products.
This feature allows you to run two copies of the N4PY program in a local
and remote computer that communicate with each other for remote operation.
N4PY Client-Server Advantages -
- smoother and faster than remote desktop applications
- logging directly at the operator's computer
- will automatically stop transmit if the Internet connection is lost
- more control of the screen view of the N4PY program on the operator's computer
- send CW from the operator's computer using keyboard or paddles
Read Client-Server Manual.
Yaesu Support is now ready for the FT-450, FT-950,
FT-2000 series, FT-5000 and FT-9000 series.
Ten Tec Orion - Controls Orion I, Orion II, Tentec Argo VI, and Tentec Eagle
Pegasus Plus - Controls TenTec Omni VII, Jupiter, Pegasus, Elecraft K2 and K3, Kenwood, Yaesu, Flex, and other Tentec radios.
ICOM - Controls most Icom rigs
DXSPOTS - This is a DX Spots tracker. The program will track your DXCC totals by band, mode and overall. In addition, the program provides a simple logger to track your QSOs. You can upload .adi log files.
Omni V Chips
Paragon Chips
Click here for YouTube Demonstration by K1ESE
Supported Operations
All N4PY programs have support for the Telepost LP-100A watt meter and also the Telepost
LP-Pan panadapter. See www.telepostinc.com for information of these products.
N4PY programs have support for the Griffin Technology Powermate.
This is a knob that is connected to the USB port and can be used as
a software controlled tuning knob. This is very helpful for radios
that do not have a remote tuning pod as this allows knob tuning while
using full software control of the radio. For information on this
USB tuning knob (called the "Powermate"), see www.griffintechnology.com
N4PY programs fully support the LDG AT-200PC Autotuner.
By using this tuner, tuning your antenna has never
been easier. This allows the program to recall tuner settings
when going to a new band without the need to transmit.
N4PY programs fully support the Palstar AT-Auto tuner.
The N4PY program will keep this tuner up to date on the current
frequency to allow the tuner to set its tuner values without
the need to transmit.
N4PY programs fully support the LDG DTS-4 and DTS-6 coax
antenna switch via serial port control. This means my program
will automatically select each antenna position via frequency ranges
that you define for each antenna switch position. There is also a
simple way to manually select antenna positions via a mouse click.
N4PY programs fully support the Tokyo High Power Amplifier HL-1.5KFX.
Regardless of what radio you are actually running, my program will send
Kenwood commands to this amplifier through a second serial port. This
allows full automatic band switching for the amplifier even with Tentec
radios.
N4PY programs support the Acom 2000 Amplifier. As you change frequencies
on your radio, the Acom 2000 will automatically tune itself to the new frequency without
the need to transmit.
N4PY programs fully support the K1EL winkey and winkey II keyer.
Band buttons - There are 9 CW band buttons, 9 SSB band buttons,
and 11 SWL band buttons. The SWL band buttons can be redefined to
any frequency range you desire. Some make these be digital band
buttons.
Full TenTec remote tuning pod programability - You can define each
of the 18 buttons on the TenTec remote tuning pod for over 30
different functions for the tuning knob.
Full tuning pod emulation - You can emulate a tentec remote tuning
pod with the PC keyboard F keys and the mouse wheel. You can even
even define an F key as an "UP" key for instant split. If the
DX station suddenly announces he is listening up 5, all you do
is press the "UP" key followed by a 5. This instantly makes VFOB
be VFOA plus 5 khz and turns on split.
Radio memory save to a file and restore from a file - Most radios
have a way for the program to save and restore memories. This allows
easy setup of radio memories.
Amptune feature allows saving amplifier drive setting for each
band segment. And when you use this feature to tune your amp,
the program automatically moves the radio up 5 khz and then moves
it back when the tune is complete.
Automatic 10 minute CW ID.
Calibrate - You can calibrate your radio so that the program displayed
frequency is very accurate.
Very flexible Transverter support - The program allows up to 7
transverters to be user defined. You can specify the drive level,
frequency range, and IF frequency for each transverter. This allows
the program to always display the actual operating frequency and
you don't have to worry about forgetting to lower your drive.
Unique control of Sub-receiver - For radios that have a sub-receiver,
right clicking on most buttons sets the values in the sub-receiver
for that button function.
Right click on "Split" button to set repeater offset - For FM mode
right clicking on the split button will set the normal split offset
for the current operating frequency.
Panadapter support - Any Flex radio, the RFSpace SDR-IQ, or the Perseus receiver can be
combined with your radio for perfect Panadapter operation. Also,
a panadapter radio, contest logging program, and CW Skimmer can all
be configured to run with the program at the same time.
Program will not allow you to transmit outside your license class
Band edge lines between CW and SSB can be moved to allow for Foreign
operation and make the band edges match the countries operating
privileges.
Full CW keyboard operation with 5 CW memories.
Kenwood, Yaesu, and K3 voice recorder operation.
User defined default filter, AGC, and step size for each mode.
Frequency event timer to allow the frequencies to be set at
specific times and days of the week.
Compatible with TopTen devices parallel port for automatic antenna
changing by band.
Compatible with Steppir
Fully compatible with WriteLog through a unique memory interface.
N4PY User's Group on Yahoo -
http://groups.yahoo.com/group/n4pysoftware/
All N4PY programs have support for the Telepost LP-100A watt meter and also the Telepost
LP-Pan panadapter. See www.telepostinc.com for information of these products.
N4PY programs have support for the Griffin Technology Powermate.
This is a knob that is connected to the USB port and can be used as
a software controlled tuning knob. This is very helpful for radios
that do not have a remote tuning pod as this allows knob tuning while
using full software control of the radio. For information on this
USB tuning knob (called the "Powermate"), see www.griffintechnology.com
N4PY programs fully support the LDG AT-200PC Autotuner.
By using this tuner, tuning your antenna has never
been easier. This allows the program to recall tuner settings
when going to a new band without the need to transmit.
N4PY programs fully support the Palstar AT-Auto tuner.
The N4PY program will keep this tuner up to date on the current
frequency to allow the tuner to set its tuner values without
the need to transmit.
N4PY programs fully support the LDG DTS-4 and DTS-6 coax
antenna switch via serial port control. This means my program
will automatically select each antenna position via frequency ranges
that you define for each antenna switch position. There is also a
simple way to manually select antenna positions via a mouse click.
N4PY programs fully support the Tokyo High Power Amplifier HL-1.5KFX.
Regardless of what radio you are actually running, my program will send
Kenwood commands to this amplifier through a second serial port. This
allows full automatic band switching for the amplifier even with Tentec
radios.
N4PY programs support the Acom 2000 Amplifier. As you change frequencies
on your radio, the Acom 2000 will automatically tune itself to the new frequency without
the need to transmit.
N4PY programs fully support the K1EL winkey and winkey II keyer.
Band buttons - There are 9 CW band buttons, 9 SSB band buttons,
and 11 SWL band buttons. The SWL band buttons can be redefined to
any frequency range you desire. Some make these be digital band
buttons.
Full TenTec remote tuning pod programability - You can define each
of the 18 buttons on the TenTec remote tuning pod for over 30
different functions for the tuning knob.
Full tuning pod emulation - You can emulate a tentec remote tuning
pod with the PC keyboard F keys and the mouse wheel. You can even
even define an F key as an "UP" key for instant split. If the
DX station suddenly announces he is listening up 5, all you do
is press the "UP" key followed by a 5. This instantly makes VFOB
be VFOA plus 5 khz and turns on split.
Radio memory save to a file and restore from a file - Most radios
have a way for the program to save and restore memories. This allows
easy setup of radio memories.
Amptune feature allows saving amplifier drive setting for each
band segment. And when you use this feature to tune your amp,
the program automatically moves the radio up 5 khz and then moves
it back when the tune is complete.
Automatic 10 minute CW ID.
Calibrate - You can calibrate your radio so that the program displayed
frequency is very accurate.
Very flexible Transverter support - The program allows up to 7
transverters to be user defined. You can specify the drive level,
frequency range, and IF frequency for each transverter. This allows
the program to always display the actual operating frequency and
you don't have to worry about forgetting to lower your drive.
Unique control of Sub-receiver - For radios that have a sub-receiver,
right clicking on most buttons sets the values in the sub-receiver
for that button function.
Right click on "Split" button to set repeater offset - For FM mode
right clicking on the split button will set the normal split offset
for the current operating frequency.
Panadapter support - Any Flex radio, the RFSpace SDR-IQ, or the Perseus receiver can be
combined with your radio for perfect Panadapter operation. Also,
a panadapter radio, contest logging program, and CW Skimmer can all
be configured to run with the program at the same time.
Program will not allow you to transmit outside your license class
Band edge lines between CW and SSB can be moved to allow for Foreign
operation and make the band edges match the countries operating
privileges.
Full CW keyboard operation with 5 CW memories.
Kenwood, Yaesu, and K3 voice recorder operation.
User defined default filter, AGC, and step size for each mode.
Frequency event timer to allow the frequencies to be set at
specific times and days of the week.
Compatible with TopTen devices parallel port for automatic antenna
changing by band.
Compatible with Steppir
Fully compatible with WriteLog through a unique memory interface.
N4PY User's Group on Yahoo -
http://groups.yahoo.com/group/n4pysoftware/
TEN-TEC Amateur Radio Equipment
TEN-TEC America's best and oldest manufacture of Commercial and Amateur radio equipment designed to provide the highest performance and greatest ease of use. Ten-Tec products set the standard for real world performance in the most rigorous and demanding applications.
TEN-TEC America's best and oldest manufacture of Commercial and Amateur radio equipment designed to provide the highest performance and greatest ease of use. Ten-Tec products set the standard for real world performance in the most rigorous and demanding applications.
Custom Software
I am also available for custom software to fit any special requirement you might have. Send an email to me and describe your special requirement to me. I can then send you a quote for it.
